The mixing of scale and particles into the boron oil emulsion tank used during the processing of metals cannot be prevented. Metal powders mixed in the liquid adhere to each other with the external oils on the liquid and create weight and form deposits at the bottom of the emulsion tank in the most inert area. This formation affects the conductivity of the liquid, causing it to deform and deteriorate, and requires the renewal of the liquid and the cleaning of the tank. The counter is stopped, the motors are dismantled, the liquid tank is taken out and needs to be cleaned, this process causes loss of work and the emulsion becomes waste due to the lack of maintenance of the emulsion.

With industrial vacuum device; It draws the emulsion that has become mud and contains metal particles into its reservoir with its high suction power without stopping the bench when necessary or removing the tank. The emulsion is filtered with the emulsion care device, it filters the emulsion separated from metal powders and external oils again with its high pressure pump and washes the counter. After the tank is cleaned, it returns the cleaned emulsion to the bench. It prevents the loss of time by making this process in a very short time. Thanks to the tank cleaning done in certain periods, the emulsion is prevented from deteriorating and becoming waste.

blank

Technical Advantages

It is a mobile device. In this way, many benches can be cleaned and maintained sequentially.

It is very simple and fast to install.

Tank capacity is 300 liters.

Blower optional 220 VOLT-3 KW or 380 Trafeze – 5.5 KW.

Suction Hose is Ø 50 mm.

Its capacity is high. It has a suction power of 200 liters per minute and a re-delivery power of 200 liters per minute.

With the cleanable 20-40 micron filter, the dirt on the bench is kept in the pre-filter.

The mixing of scale and particles into the boron oil emulsion tank used during the processing of metals cannot be prevented. Metal powders mixed in the liquid adhere to each other with the external oils on the liquid and create weight and form deposits at the bottom of the emulsion tank in the most inert […]